01
Connect your CAD & PLM
Connect Onshape, Fusion, SolidWorks, your PLM, and supplier catalogs. Adam reads your geometry, BOMs, drawings, and revisions in real time, one connected graph, no exported copies.
Backed by Y Combinator
Built for hardware work
Adam has built-in skills that make it an expert in CAD, research, sourcing, and engineering documentation.
Prepare a design review
Pull the latest build notes, open issues, and CAD screenshots into a design review brief for tomorrow.
Compare supplier options
Find three suppliers for this anodized aluminum enclosure and compare cost drivers, lead times, and risks.
Clean up a BOM
Review this BOM, fill missing manufacturer part numbers, flag long-lead items, and prepare it for sourcing.
Create an ECO packet
Turn the Rev C notes into an ECO packet with affected parts, risks, approvals, and supplier instructions.
Draft an RFQ
Draft an RFQ email for the revised bracket with tolerances, finish, quantity breaks, and target delivery.
Track build blockers
Summarize the blockers from our bring-up channel and turn them into owners, next steps, and dates.
Find component alternates
Find pin-compatible alternatives for this backordered MCU and explain firmware and supply-chain tradeoffs.
Package a factory handoff
Collect the drawings, BOM, QA checklist, and open questions into a manufacturer handoff folder.
Prepare a design review
Pull the latest build notes, open issues, and CAD screenshots into a design review brief for tomorrow.
Compare supplier options
Find three suppliers for this anodized aluminum enclosure and compare cost drivers, lead times, and risks.
Clean up a BOM
Review this BOM, fill missing manufacturer part numbers, flag long-lead items, and prepare it for sourcing.
Create an ECO packet
Turn the Rev C notes into an ECO packet with affected parts, risks, approvals, and supplier instructions.
Draft an RFQ
Draft an RFQ email for the revised bracket with tolerances, finish, quantity breaks, and target delivery.
Track build blockers
Summarize the blockers from our bring-up channel and turn them into owners, next steps, and dates.
Find component alternates
Find pin-compatible alternatives for this backordered MCU and explain firmware and supply-chain tradeoffs.
Package a factory handoff
Collect the drawings, BOM, QA checklist, and open questions into a manufacturer handoff folder.
The AI workspace for hardware teams
By continuing, you agree to ourTerms of ServiceandPrivacy Policy
How it works
Update the drawing for rev D
Done. Drawing + ECO ready:
2 dims revised · 3 affected items
02
Tell Adam what you need
Message Adam from wherever you already work: Slack or email. “Thicken the sinking boss,” “build the v3 BOM,” “RFQ the enclosure.” Adam does the work.
Model edit · Boss draft fix
Branch ready · 2 features changed
EditApprove
03
Get the finished work
Adam hands back the real output: a branched model edit, a reconciled BOM, an updated drawing, a render set, a drafted RFQ, each linked to its source, ready to ship or adjust.
Works with your stack
Adam connects to the CAD, PLM, suppliers, and tools your hardware team already runs on. No migration, no exported copies of your IP.
OnshapeAutodesk FusionSolidWorksArena
McMaster-Carr
Digi-Key
XometryGoogle DriveJiraNotionAirtableSlackWhat Adam can do for you
Geometry, BOMs, sourcing, renders, docs, vendors. Adam does the recurring work across your CAD and your stack, and hands back the finished output, from model to BOM to drawing to render to RFQ.
The M3 boss keeps sinking on the molded part. Fix it and add draft?
Done. I thinned the boss wall to 1.6 mm, tied it to the floor with a gusset rib, added a 0.5 mm root fillet, and set 1.0° draft toward the A-side. Drawing dims updated to match. Want to see the before/after?
FusionBuild the BOM for the v3 assembly and flag anything not released.
47 line items, 31 unique part numbers. Six are still WIP rev, and the gasket references rev B while the latest released drawing is rev C, a mismatch. Two screws duplicate under different PNs; I'd consolidate to McMaster 91290A115. Push the released items to Arena?
OnshapeGoogle DriveArenaThe Omron limit switch on the v3 just went end-of-life. Find a drop-in replacement.
Browsed Digi-Key, Mouser, and Newark for a drop-in. The Panasonic AVL3 matches the 6.5 N force and footprint, in stock at $0.62 for your 250 qty. I logged the top three in a sheet. Want me to RFQ it?
BrowserClient wants a warmer palette. Give me three CMF directions for the review.
Staged three on the body: Sandstone (Pantone 7506 C, champagne ring), Terracotta (7522 C, bronze), and Bone (off-white satin, brushed PVD). All reuse one texture tool, so no added mold cost. I'll lay the renders into a comparison deck and the specs into a spreadsheet. Want both for the review?
FusionGoogle DriveI need a hero shot and an exploded view of the wearable for Friday's review.
Both rendering. Hero is a 3/4 on warm-grey seamless, keyed camera-left with a soft fill and a rim to catch the anodized edge, 35 mm so the proportions read honest. The exploded view pulls the six components along Z with leader callouts. They'll land in ~25 min. Want a turntable too?
OnshapeFigmaGet an RFQ out to our two sheet-metal shops for the enclosure, 50 and 250 qty.
Drafted RFQs to both shops with the rev C STEP, the flat-pattern DXF, and the drawing: 5052-H32 at 2.0 mm, 8 bends, clear chromate per MIL-DTL-5541 Type II Class 3, qty breaks and lead time. I left our target price out so we don't anchor them. Both are staged in your drafts to send.
OnshapeWhat Adam can do for you
Geometry, BOMs, sourcing, renders, docs, vendors. Adam does the recurring work across your CAD and your stack, and hands back the finished output, from model to BOM to drawing to render to RFQ.
Build the BOM for the v3 assembly and flag anything not released.
47 line items, 31 unique part numbers. Six are still WIP rev, and the gasket references rev B while the latest released drawing is rev C, a mismatch. Two screws duplicate under different PNs; I'd consolidate to McMaster 91290A115. Push the released items to Arena?
OnshapeGoogle DriveArenaPricing
Free
Free
To get started
Start Free- 300 daily refresh credits
- Shared folders
- Custom models
- Persistent Memory
- Multimodal generation
- Lives in Slack and email
- 3,000+ integrations
Starter
$40/ month
For getting started
Get Started- 4,000 credits
- 300 daily refresh credits
- Shared folders
- Custom models
- Persistent Memory
- Multimodal generation
- Lives in Slack and email
- 3,000+ integrations
Pro
$200/ month
For most workflows
Start Free Trial- 20,000 credits
- 300 daily refresh credits
- Shared folders
- Custom models
- Persistent Memory
- Multimodal generation
- Lives in Slack and email
- 3,000+ integrations
- Cloud storage
Max
$1000/ month
For power users
Get Started- 100,000 credits
- 300 daily refresh credits
- Shared folders
- Custom models
- Persistent Memory
- Multimodal generation
- Lives in Slack and email
- 3,000+ integrations
- Cloud storage
Frequently Asked Questions
Don't see your question answered? Email founders@adam.new